Propane / Natural Gas Heaters

When construction heat is needed, we can provide rugged steel frame heaters ranging from 100,000 Btuh up to 1,500,000 Btuh.  All units have electronic ignition, thermostat controls, and heavy duty rubber wheels for easy handling.

Our gas fired tent heaters are available in propane or natural gas, available in 80,000 Btuh, 170,000 Btuh, and 350,000 Btuh.  All heaters set up quickly and are exceptionally quiet during operation.  They have a direct spark ignition system, a thermostatic control, and are fully ductible. 

The following tables provides basic information for each heating unit. 
PDF files with more detailed information can be downloaded by clicking on the Model name at the top of each table.   

If you still have questions regarding your heating needs, please Contact Us directly!

Propane / Natural Gas Heaters
	TOPP				Heat Cannon
	TOPP 500		TOPP 1000		F-1500T
Fuel Type	Propane Gas	Natural Gas	Propane Gas	Natural Gas	Propane Gas	Natural Gas
Heating Capacity (Btu/h)	400,000		1,000,000		1,500,000
Inlet Pressure	11 in. W.C.	3.5 in. W.C.	11 in. W.C.	3.5 in. W.C.	11 in. W.C.	7.5 in. W.C.
Power Supply (Volts/Hz/Amps/Phase)	120/60/12/1		120/60/20/1		120/60/20/1
Fan Motor	1/3 H.P.		1 H.P.		1 H.P.
Air Circulation	2,000 CFM		7,000 CFM		7,000 CFM
Fuel Consumption	18.5 LB/HR	380 CFH	46 LB/HR	952 CFH	69 LB/HR	1428 CFH
Dimensions (inches) L x W x H	48 x 22 x 24		61 x 29 x 38		61 x 29 x 38

All Heat Cannon units have:

	Electronic direct spark ignition control with 100% flame safeguard.
	Hot air at the touch of a single switch.
	Full air circulation - even when heat is not required.
	Changing fuel supply - just turn the fuel selector valve.  No further adjustments required.

HeatCannon is a registered trademark of Flagro Industries Limited

Propane / Natural Gas Heaters
		TS080		TS170		TS350
Fuel Type		Propane Gas	Natural Gas	Propane Gas	Natural Gas	Propane Gas	Natural Gas
Heating Capacity (Btu/h)		80,000		170,000		350,000
Ventilation Air Require to Support Combustion		450 CFM		1,200 CFM		2,400 CFM
Burner Manifold Pressure		10 in. W.C.	4 in. W.C.	10 in. W.C.	4 in. W.C.	8 in. W.C.	3.5 in. W.C.
Inlet Gas Supply Pressure Acceptable at the Inlet of the Heater for Purpose of Input Adjustment	Max.	13.5 in W.C.
	Min.	11 in. W.C.	7 in. in W.C.	11 in. W.C.	7 in. in W.C.	11 in. W.C.	7 in. in W.C.
Fuel Consumption Per Hour		3.70 lbs.	80 cu. ft.	7.87 lbs.	170 cu. ft.	16.2 lbs.	350 cu. ft.
Motor Characteristics		Ball Bearing
		1/8 H.P. 1,100 RPM		1/3 H.P. 1,100 RPM		1 H.P. 1,725 RPM
Electrical Supply (Volts/Hz/Phase)		115/60/1
Amp Draw	Starting	5.0		7.3		35.0
	Continuous Operation	1.5		5.0		14.0
Dimensions (inches) L x W x H		29½ x 13½ x 20		30¾ x 18¼ x 28¼		48 x 22¼ x 32¾
Minimum Safe Distances From Nearest Combustible Materials	Top	1 ft.
	Sides	1 ft.
	Back	1 ft.
	Blower Outlet	6 ft.
	Gas Supply	Propane Gas - 6 ft., 1.83 m Natural Gas - N/A
Net Weight		67		126		295
Minimum Ambient Temperature in Which Heater May Be Used		-20ºF

L.B. White is a registered trademark of L. B. White